15358968703
Welcome to the official mall of Cloud rolled steel !
Recruitment of H-beam Project Department of Fushun new steel
Company profile
Fushun new iron and Steel Co., Ltd., established in October, 2005, is subordinate to Beijing Jianlong heavy industry group. It is a large-scale joint-stock iron and steel enterprise controlled by the private sector and restructured by the original Fushun new iron and Steel Co., Ltd., which was founded in 1958. The registered capital of the company is 1.05 billion yuan, with Beijing Jianlong Heavy Industry Group Co., Ltd. accounting for 70% of the shares and state-owned shares accounting for 30%. Fushun new steel has 5257 on-the-job employees, with total assets of RMB 10.059 billion and net assets of RMB 3.535 billion; From 2005 to 2021, the accumulated tax paid was RMB 8.058 billion, and the accumulated state-owned share dividends were RMB 1.3 billion.
H-beam production line recruitment
[one process team leader]150000-350000 yuan / year
operating duty:
1. Be responsible for the investigation, consultation, process scheme, formulation of technical conditions, site layout, production organization, etc. in the early stage of the project;
2. Be responsible for the equipment design review of the project process equipment, including the investigation and selection of manufacturers and standard parts manufacturers, and participate in the selection of important main and auxiliary equipment by the general contractor;
3. Be responsible for the cooperation and coordination of the Design Institute, manufacturer and construction team service personnel related to the process equipment;
4. Be responsible for the design review of on-site process layout and production logistics layout, as well as the supervision of process equipment and the organization of arrival;
5. Be responsible for inspection, construction period quality control, acceptance and service during process equipment installation and commissioning;
6. Be responsible for the installation supervision and commissioning acceptance of process equipment at the project site, and achieve production and efficiency;
7. Be responsible for changes during process equipment installation;
8. Responsible for reviewing various medium indexes of H-beam;
9. Be responsible for the balance of gas, steam, electricity, nitrogen, oxygen and water during the construction and operation of H-beam;
10. Be responsible for the discussion and optimization of various medium operation indexes of H-beam;
11. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 38 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in rolling and iron and steel metallurgy;
4. More than 8 years' experience in H-beam production process;
5. Registration within the group: the performance appraisal results in 2020 and 2021 are "a" or above; No demerit recording or above administrative sanctions in 2021 and 2022; Special excellent people can relax the conditions (performance, rewards and punishments are not relaxed).
[3 Mechanical Engineers]70000-300000 yuan / year
operating duty:
1. Be responsible for the drafting, signing and implementation of equipment technical agreement;
2. Responsible for the work related to project bidding;
3. Responsible for supervising the production of equipment and organizing the arrival of equipment;
4. Responsible for site equipment installation coordination and equipment commissioning acceptance;
5. Responsible for the change and visa work during equipment installation;
6. Be responsible for equipment construction progress and quality;
7. Responsible for technical exchange of equipment, formulation of equipment technical parameters and equipment bidding;
8. Be responsible for inspection, duration control, acceptance and service during equipment installation and commissioning;
9. Be responsible for the cooperation and coordination of the Design Institute, manufacturer, construction team and other service personnel related to the equipment; 10. Be responsible for equipment spot check, preparation and training of operation procedures for each post;
11. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in mechanical engineering;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one furnace Engineer]70000-300000 yuan / year
operating duty:
1. Be responsible for the drafting, signing and implementation of technical agreements for furnace equipment;
2. Responsible for bidding related work of heating furnace section project;
3. Responsible for supervising the manufacture of furnace equipment and organizing the arrival of equipment;
4. Responsible for site equipment installation coordination and equipment commissioning acceptance;
5. Be responsible for equipment construction progress and quality;
6. Be responsible for inspection, duration control, acceptance and service during equipment installation and commissioning;
7. Responsible for the management of kiln operation training, monitoring of kiln equipment, solving kiln problems, inspection and correction of kiln parameters;
8. Train the firemen in theory and practice;
9. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in furnace engineering;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one leader of electrical automation team]150000-300000 yuan / year
operating duty:
1. Be responsible for drafting, signing and implementing technical agreements for electrical equipment;
2. Responsible for supervising the manufacture of electrical equipment and organizing the arrival of equipment;
3. Responsible for site electrical equipment installation coordination and equipment commissioning acceptance;
4. Responsible for the change and visa work during the installation of electrical equipment;
5. Be responsible for the construction progress and quality of electrical equipment;
6. Responsible for technical exchange of electrical equipment, formulation of equipment technical parameters and equipment bidding;
7. Responsible for inspection, construction period control, acceptance and service during installation and commissioning of electrical equipment; 8. Be responsible for the cooperation and coordination of design institutes, manufacturers and construction team service personnel related to electrical equipment;
9. Responsible for spot inspection of electrical equipment, preparation and training of operation procedures for each post;
10. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in electrical and automation;
4. More than 8 years of relevant professional and technical work experience in H-beam production line is preferred;
5. Registration within the group: the performance appraisal results in 2020 and 2021 are "a" or above; No demerit recording or above administrative sanctions in 2021 and 2022; Special excellent people can relax the conditions (performance, rewards and punishments are not relaxed).
[one electrical engineer]70000-300000 yuan / year
operating duty:
1. Responsible for technical exchange of electrical equipment, formulation of equipment technical parameters and equipment bidding;
2. Responsible for site electrical equipment installation coordination and equipment commissioning acceptance;
3. Performance review and determination of electrical equipment;
4. Preparation and review of electrical scheme;
5. Project construction quality inspection, supervision and acceptance;
6. Responsible for spot inspection of electrical equipment, preparation and training of operation procedures for each post;
7. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in electrical or related;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one automation engineer]70000-300000 yuan / year
operating duty:
1. Responsible for technical exchange of automation instruments and equipment, formulation of equipment technical parameters and equipment bidding;
2. Responsible for site automation instrument equipment installation coordination and equipment commissioning acceptance;
3. Formulation and review of automation scheme;
4. Project construction quality inspection, supervision and acceptance;
5. Regularly organize automation personnel to carry out safety and skill training;
6. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in automation or related;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one leader of hydraulic group]150000-300000 yuan / year
operating duty:
1. Be responsible for the drafting, signing and implementation of technical agreements for hydraulic equipment;
2. Responsible for the work related to project bidding;
3. Supervise the manufacture of hydraulic equipment and organize the arrival of equipment;
4. Responsible for site hydraulic equipment installation coordination and equipment commissioning acceptance;
5. Be responsible for the change and visa work during the installation of hydraulic equipment;
6. Be responsible for the construction progress and quality of hydraulic equipment;
7. Responsible for technical exchange of hydraulic equipment, formulation of equipment technical parameters and equipment bidding;
8. Be responsible for inspection, duration control, acceptance and service during installation and commissioning of hydraulic equipment; 9. Be responsible for the cooperation and coordination of design institutes, manufacturers and construction team service personnel related to hydraulic equipment;
10. Be responsible for spot inspection of hydraulic equipment, preparation of operating procedures for each post, training, etc;
11. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in hydraulic control;
4. More than 8 years of relevant professional and technical work experience in H-beam production line is preferred;
5. Registration within the group: the performance appraisal results in 2020 and 2021 are "a" or above; No demerit recording or above administrative sanctions in 2021 and 2022; Special excellent people can relax the conditions (performance, rewards and punishments are not relaxed).
[2 hydraulic engineers]70000-300000 yuan / year
operating duty:
1. Responsible for technical exchange of hydraulic equipment, formulation of equipment technical parameters and equipment bidding;
2. Responsible for site hydraulic equipment installation coordination and equipment commissioning acceptance;
3. Hydraulic equipment performance review and determination;
4. Formulation and review of hydraulic scheme;
5. Project construction quality inspection, supervision and acceptance;
6. Be responsible for spot inspection of hydraulic equipment, preparation of operating procedures for each post, training, etc;
7. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in hydraulic control;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one water treatment engineer]70000-300000 yuan / year
operating duty:
1. Be responsible for the drafting, signing and implementation of technical agreement for water system;
2. Responsible for the work related to project bidding;
3. Responsible for supervising the production of water system equipment and organizing the arrival of equipment;
4. Responsible for on-site water system equipment installation coordination and equipment commissioning acceptance;
5. Be responsible for the change and visa work during the installation of water system equipment;
6. Be responsible for the construction progress and quality of water system equipment;
7. Responsible for inspection, duration control, acceptance and service during installation and commissioning of water system equipment;
8. Responsible for spot inspection of water treatment equipment, preparation and training of operation procedures for each post;
9. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in water treatment;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one leader of intelligent manufacturing team]150000-300000 yuan / year
operating duty:
1. Responsible for the preliminary investigation and technical demonstration of the black light factory construction;
2. Responsible for the drafting, signing and implementation of technical agreements related to technology and equipment of black light factory;
3. Responsible for black light factory project selection, negotiation, application, review and implementation of technical scheme;
4. Be responsible for the construction and optimization of information platform for H-beam production line, and promote the integration of equipment automation and information; 5. Responsible for equipment installation supervision, commissioning acceptance, production and efficiency of black light factory;
6. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in automation or computer;
4. More than 8 years of relevant professional and technical work experience in H-beam production line is preferred;
5. Registration within the group: the performance appraisal results in 2020 and 2021 are "a" or above; No demerit recording or above administrative sanctions in 2021 and 2022; Special excellent people can relax the conditions (performance, rewards and punishments are not relaxed).
[one energy engineer]70000-300000 yuan / year
operating duty:
1. Responsible for all kinds of cost control of "black light factory";
2. Assist in the preparation of energy reports, and put forward suggestions for improvement and decision-making basis;
3. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in energy management;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one quality engineer]70000-300000 yuan / year
operating duty:
1. Prepare or revise departmental quality management system documents;
2. Refine the business process under the framework of quality management system according to business needs;
3. Be responsible for the publicity, implementation, supervision and implementation of the company's quality system documents within the Department, and complete the internal and external audit of the company's quality system;
4. Responsible for internal audit and standardization of project process documents;
5. Be responsible for tracking and handling quality problems during project implementation, product development and product delivery;
6. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in quality management;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one Planning Engineer]70000-300000 yuan / year
operating duty:
1. Be responsible for the planning task of the project, and be responsible for the planning quality and work progress of the post;
2. Undertake the general work of the planned project, be responsible for the data calculation and analysis, drawing and report preparation of the project, and complete the owner's services related to the project;
3. Implement the work plan formulated by the Department and the project manager;
4. Put forward professional improvement opinions and suggestions on the problems during the project;
5. Be responsible for the data collection and sorting of the project, and prepare relevant report documents;
6. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in planning or related;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one condition monitoring engineer]70000-300000 yuan / year
operating duty:
1. Be responsible for regularly organizing data collection and Analysis on the operation status of rotating equipment, issuing analysis reports, formulating preventive maintenance strategies, and improving the reliability of responsible equipment;
2. Organize vibration monitoring and analysis for abnormal vibration of key equipment, and formulate treatment plan;
3. Participate in fault investigation and analysis related to key equipment;
4. Participate in the preparation or review of relevant technical requirements such as vibration monitoring scheme for rotating equipment in the project construction stage;
5. Participate in daily theoretical and practical training;
6. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in condition monitoring;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[one system engineer]70000-300000 yuan / year
operating duty:
1. System performance monitoring, collecting performance data and submitting performance reports;
2. Emergency handling, including network environment, operating system / middleware, system failure, high consumption of resources, complex concurrent operation accidents, etc;
3. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 45 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in computer related;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
[4 Civil constructors (2 Civil constructors and 2 steel constructors)]70000-150000 yuan / year
operating duty:
1. Be responsible for the dynamic control and management of technology, quality, progress, etc. in the construction process of the company's engineering projects, the coordination and balance of resources required for construction, professional extension management and organization of implementation;
2. Review and approve the commencement report of the project, and organize the review and approval of the construction organization design or construction scheme;
3. Responsible for the review of project negotiation and site visa, and the review of the completion of monthly quantities; 4. Organize the implementation of "three supplies and one leveling" project;
5. Be responsible for the establishment and improvement of the project quality management system;
6. Be responsible for the formulation of project quality management plan and scheme, and organize the implementation;
7. Be responsible for the registration of project quality supervision, the supervision of quality behavior and process, and the verification of project quality grade;
8. Be responsible for organizing the analysis of major quality problems of the project and formulating solutions;
9. Be responsible for organizing the investigation of construction quality accidents of the project, and putting forward assessment to the responsible unit;
10. Be responsible for the evaluation of the construction unit and the supervision unit of the project;
11. Organize the completion acceptance of the project;
12. Be responsible for the professional support and service of engineering construction technology in the project implementation stage;
13. Be responsible for the coordination of project site construction;
14. Complete the temporary work assigned by the leaders.
Job requirements:
1. Age 40 and below;
2. Male, healthy, able to work full load for eight hours;
3. Full time bachelor degree or above, major in civil engineering or related;
4. More than 5 years of relevant professional and technical work experience in H-beam production line is preferred.
Compensation and benefits
Application materials and contact information
1. Registration deadline: once the enrollment is completed
2. Materials to be provided for registration: personal resume, copy of self recommendation letter and ID card, employment certificate, highest academic degree certificate, graduation certificate, online certification report of xuexin.com, copy of professional and technical job certificate, catalogue of published academic achievements, copies of award-winning and patent certificates, proof materials of achievement transformation, and other relevant materials that I think it is necessary to provide
3. Registration method: the registration method is in the form of email + attachment, and the registration materials are sent to the email: [email protected] The subject format of the e-mail is "H-beam Project Department of Fushun new steel + applied position + name"
4. Contact: zhaozhiwen, Tel.: 15542235621
5. Place of work: Fushun New Steel Co., Ltd., Wanghua District, Fushun City, Liaoning Province
Gather industry trends
15358968703
Gather industry trends
15358968703